#
#	Laptop Configuration
#	for uchee.pacers.org (IBM ThinkPad 1451 i)
#	Chris Davis <cdavis@pacers.org>
#

machine		"i386"
cpu		"I586_CPU"
ident		UCHEE
maxusers	10

options		MATH_EMULATE		#Support for x87 emulation
options		INET			#InterNETworking
options		FFS			#Berkeley Fast Filesystem
options		FFS_ROOT		#FFS usable as root device [keep this!]
options		NFS			#Network Filesystem
options		NFS_ROOT		#NFS usable as root device, "NFS" req'ed
options		MFS			#Memory Filesystem
options		MFS_ROOT		#MFS usable as root device, "MFS" req'ed
options		MSDOSFS			#MSDOS Filesystem
options		"CD9660"		#ISO 9660 Filesystem
options		"CD9660_ROOT"		#CD-ROM usable as root. "CD9660" req'ed
options		PROCFS			#Process filesystem
options		"COMPAT_43"		#Compatible with BSD 4.3 [KEEP THIS!]
options		SCSI_DELAY=15000	#Be pessimistic about Joe SCSI device
options		UCONSOLE		#Allow users to grab the console
options		FAILSAFE		#Be conservative
options		USERCONFIG		#boot -c editor
options		VISUAL_USERCONFIG	#visual boot -c editor

# You may need to reset all pccards after resuming
options		PCIC_RESUME_RESET

# Detach ATAPI devices when the ATA card is removed
options		ATAPI_DETACH

# Suspend the system when the battery status is "Low"
options	"APM_BATT_LOW_SUSPEND"

# If you want to use NTP on laptop machines, uncomment the following 
# option.  Current APM implementation affects NTP client.
options	"APM_NO_CLOCK_ADJUST"

# PAO Enhanced PCI-PCIC support (experimental)
#options	CB_TEST
#options	FORCE_IRQ_ROUTING

config		kernel	root on wd0

controller	isa0
controller	pnp0
controller	eisa0
controller	pci0

#sound stuff
#controller	snd0
device	pcm0
#device	sb0 at isa ? port 0x220 irq 5 drq 1
#device	sbxvi0 at isa ? drq 5
#device	sbmidi0 at isa ? port 0x330
#device	opl0 at isa ? port 0x388
#device	awe0 at isa ? port 0x620

# Dont remove these two lines!
pseudo-device	card	1

# You must use "flags 0x1" when you don't hear any negotiation noise(?)
# if you use modem card, or pccardd doesn't read cis tuple, tell you 
# 'No card in database for"(null)"("(null)")' in case of Cirrus Logic's 
# pcic is your PC.
#device		pcic0   at isa? port 0x3e0 flags 0x1 irq 11
device		pcic0   at isa? port 0x3e0 irq 11
device		pcic0   at isa? port 0x3e4 irq 11
device		pcic1   at isa? port 0x3e2	# for HiNote Ultra II
device		pcic1   at isa? port 0x3e4	# for Chandra II

controller	fdc0	at isa? port "IO_FD1" bio irq 6 drq 2
disk		fd0	at fdc0 drive 0

options		FDC_YE

options		"CMD640"	# work around CMD640 chip deficiency
controller	wdc0	at isa? port "IO_WD1" bio irq 14
disk		wd0	at wdc0 drive 0
disk		wd1	at wdc0 drive 1

controller	wdc1	at isa? port "IO_WD2" bio irq 15
disk		wd2	at wdc1 drive 0
disk		wd3	at wdc1 drive 1


options		ATAPI		#Enable ATAPI support for IDE bus
options		ATAPI_STATIC	#Don't do it as an LKM
device		acd0		#IDE CD-ROM
device		wfd0		#IDE floppy (LS-120)

# A single entry for any of these controllers (ncr, ahb, ahc) is
# sufficient for any number of installed devices.
controller	ncr0
controller	ahb0
controller	ahc0
controller	isp0

# This controller offers a number of configuration options, too many to
# document here  - see the LINT file in this directory and look up the
# dpt0 entry there for much fuller documentation on this.
controller	dpt0

controller	adw0

controller	scbus0

device		da0

device		sa0

device		pass0

device		cd0	#Only need one of these, the code dynamically grows


# atkbdc0 controlls both the keyboard and the PS/2 mouse
controller	atkbdc0	at isa? port IO_KBD tty
device		atkbd0	at isa? tty irq 1
device		psm0	at isa? tty irq 12

device		vga0	at isa? port ? conflicts

# splash screen/screen saver
pseudo-device	splash

# syscons is the default console driver, resembling an SCO console
device		sc0	at isa? tty
# Enable this and PCVT_FREEBSD for pcvt vt220 compatible console driver
#device		vt0	at isa? tty
#options		XSERVER			# support for X server
#options		FAT_CURSOR		# start with block cursor
# If you have a ThinkPAD, uncomment this along with the rest of the PCVT lines
#options		PCVT_SCANSET=2		# IBM keyboards are non-std

device		npx0	at isa? port IO_NPX irq 13

#
# Laptop support (see LINT for more options)
#
device		apm0    at isa?		# Advanced Power Management

device		sio0	at isa? port "IO_COM1" tty irq 4
device		sio1	at isa? port "IO_COM2" tty irq 3
device		sio2	at isa? disable port "IO_COM3" tty irq 5
device		sio3	at isa? disable port "IO_COM4" tty irq 9
device		sio4
device		sio5

#device		mse0	at isa? port 0x23c tty irq 5

# Parallel port
device		ppc0	at isa? port? flags 0x40 net irq 7
controller	ppbus0
device		lpt0	at ppbus?
device		plip0	at ppbus?
device		ppi0	at ppbus?
#controller	vpo0	at ppbus?


# Order is important here due to intrusive probes, do *not* alphabetize
# this list of network interfaces until the probes have been fixed.
# Right now it appears that the ie0 must be probed before ep0. See
# revision 1.20 of this file.

device cs0 at isa? disable port 0x300 net irq ?
device ep0
device wi0
device xe0

# IBM Smart Capture PCMCIA card
device	scc0
device	scc1

# PCMCIA Joystick
device		joy0	at isa? port "IO_GAME"

# PCMCIA GPIB card
device		gp0	at isa? port 0x2c0 tty

pseudo-device	loop
pseudo-device	ether
pseudo-device	sl	1
# ijppp uses tun instead of ppp device
#pseudo-device	ppp	1
pseudo-device	vn	1
pseudo-device	tun	1
pseudo-device	pty	16
pseudo-device	gzip		# Exec gzipped a.out's

#
# Enable the kernel debugger.
#
options		DDB

# KTRACE enables the system-call tracing facility ktrace(2).
# This adds 4 KB bloat to your kernel, and slightly increases
# the costs of each syscall.
#options		KTRACE		#kernel tracing

# This provides support for System V shared memory.
#
options		SYSVSHM
options		SYSVSEM
options		SYSVMSG

#  The `bpfilter' pseudo-device enables the Berkeley Packet Filter.  Be
#  aware of the legal and administrative consequences of enabling this
#  option.  The number of devices determines the maximum number of
#  simultaneous BPF clients programs runnable.
pseudo-device	bpfilter 4	#Berkeley packet filter