# # Sample Laptop Configuration # for lenlen.ntc.keio.ac.jp (Toshiba Libretto 50CT) # Tatsumi Hosokawa # machine "i386" # cpu "I386_CPU" # cpu "I486_CPU" cpu "I586_CPU" # cpu "I686_CPU" ident ZAPHOD maxusers 10 # options MATH_EMULATE #Support for x87 emulation options INET #InterNETworking options FFS #Berkeley Fast Filesystem options NFS #Network Filesystem options MFS #Memory Filesystem options MSDOSFS #MSDOS Filesystem # options "CD9660" #ISO 9660 Filesystem options PROCFS #Process filesystem options "COMPAT_43" #Compatible with BSD 4.3 [KEEP THIS!] options SCSI_DELAY=15 #Be pessimistic about Joe SCSI device options BOUNCE_BUFFERS #include support for DMA bounce buffers options UCONSOLE #Allow users to grab the console # options FAILSAFE #Be conservative options USERCONFIG #boot -c editor options VISUAL_USERCONFIG #visual boot -c editor options MROUTING # If your laptop have not had Windoze95-Ready BIOS, please update it. # Such old BIOS'es sometimes have critical bugs at 32-bit protected # mode APM BIOS interface (which have not used by Windoze 3.1). # PC-card suspend/resume support (experimental) options APM_PCCARD_RESUME options PCIC_RESUME_RESET # Keep power for serial cards when the system suspends # (If your machine hangs up when you try to suspend the system with # FAX/Modem PCMCIA card, uncomment this option). #options SIO_SUSP_KEEP_PWR # Detach SCSI devices when the SCSI card is removed options SCSI_DETACH # Detach ATAPI devices when the ATA card is removed options ATAPI_DETACH # Japanese version of WaveLAN PCMCIA uses 2.4GHz band instead of 915MHz # band that US version uses. If you want to use Japanese version of # WaveLAN, uncomment this line, or edit the corresponding config entry # of /etc/pccard.conf. #options "WAVELAN_PCMCIA_24" # Suspend the system when the battery status is "Low" # options "APM_BATT_LOW_SUSPEND" # If you want to use NTP on laptop machines, uncomment the following # option. Current APM implementation affects NTP client. #options "APM_NO_CLOCK_ADJUST" # For Win98 BIOS of ThinkPad options #options "APM_TP_WIN98BIOS" # Some X-servers cannot survive suspend/resume on laptop. # This option kicks her when the system is resumed from suspended mode. #options SYSCONS_VTY_RESUME config kernel root on wd0 controller isa0 #controller eisa0 controller pci0 # Dont remove these two lines! pseudo-device card 1 # You must use "flags 0x1" when you don't hear any negotiation noise(?) # if you use modem card, or pccardd doesn't read cis tuple, tell you # 'No card in database for"(null)"("(null)")' in case of Cirrus Logic's # pcic is your PC. #device pcic0 at isa? port 0x3e0 flags 0x1 irq 11 vector pcicintr device pcic0 at isa? port 0x3e0 irq 11 vector pcicintr device pcic0 at isa? port 0x3e4 irq 11 vector pcicintr device pcic1 at isa? port 0x3e2 # for HiNote Ultra II device pcic1 at isa? port 0x3e4 # for Chandra II controller fdc0 at isa? port "IO_FD1" bio irq 6 drq 2 vector fdintr disk fd0 at fdc0 drive 0 # controller fdc1 at isa? disable port "IO_YEFDC" bio irq 6 vector fdintr # disk fd1 at fdc1 drive 0 # options FDC_YE options "CMD640" # work around CMD640 chip deficiency controller wdc0 at isa? port "IO_WD1" bio irq 14 vector wdintr disk wd0 at wdc0 drive 0 # controller wdc1 at isa? port "IO_WD2" bio irq 15 vector wdintr # disk wd1 at wdc1 drive 0 options ATAPI #Enable ATAPI support for IDE bus options ATAPI_STATIC #Don't do it as an LKM device wcd0 #IDE CD-ROM device wfd0 #IDE floppy (LS-120) # syscons is the default console driver, resembling an SCO console device sc0 at isa? port "IO_KBD" tty irq 1 vector scintr # Enable this and PCVT_FREEBSD for pcvt vt220 compatible console driver #device vt0 at isa? port "IO_KBD" tty irq 1 vector pcrint #options XSERVER # support for X server #options FAT_CURSOR # start with block cursor # If you have a ThinkPAD, uncomment this along with the rest of the PCVT lines #options PCVT_SCANSET=2 # IBM keyboards are non-std # Mandatory, don't remove device npx0 at isa? port "IO_NPX" flags 0x1 irq 13 vector npxintr # # Laptop support (see LINT for more options) # device apm0 at isa? # Advanced Power Management # options APM_BROKEN_STATCLOCK # Workaround some buggy APM BIOS device sio0 at isa? port "IO_COM1" tty irq 4 vector siointr device sio1 at isa? port "IO_COM2" tty irq 3 vector siointr device sio2 at isa? disable port "IO_COM3" tty irq 5 vector siointr device sio3 at isa? disable port "IO_COM4" tty irq 9 vector siointr device sio4 at isa? disable port "IO_COM3" tty irq 5 vector siointr device lpt0 at isa? port? tty irq 7 vector lptintr device lpt1 at isa? port? tty device psm0 at isa? port "IO_KBD" conflicts tty irq 12 vector psmintr device ed1 at isa? disable port 0x300 net irq 10 iomem 0xd8000 vector edintr #device ie0 at isa? port 0x300 net irq 10 iomem 0xd0000 vector ieintr device ep0 at isa? port 0x300 net irq 10 vector epintr device ep1 at isa? disable port 0x300 net irq 10 vector epintr #device ex0 at isa? port? net irq? vector exintr device fe0 at isa? port 0x300 net irq 10 vector feintr device fe1 at isa? disable port 0x300 net irq 10 vector feintr #device le0 at isa? port 0x300 net irq 5 iomem 0xd0000 vector le_intr #device lnc0 at isa? port 0x280 net irq 10 drq 0 vector lncintr device sn0 at isa? port 0x300 net irq 10 vector snintr device sn1 at isa? disable port 0x300 net irq 10 vector snintr device wlp0 at isa? port 0x300 net irq 11 vector wlpintr device wlp1 at isa? disable port 0x300 net irq 11 vector wlpintr #device cs0 at isa? disable port 0x300 net irq ? vector csintr device cnw0 at isa? port 0x300 net irq 5 vector cnwintr device cnw1 at isa? disable port 0x300 net irq 5 vector cnwintr # do not enable ze0 and zp0 (these devices are obsolete) ##device ze0 at isa? port 0x300 net irq 5 iomem 0xd8000 vector zeintr ##device zp0 at isa? port 0x300 net irq 10 iomem 0xd8000 vector zpintr # IBM Smart Capture PCMCIA card # device scc0 # device scc1 # Hitachi microcomputer system Speach Synthesizer card # device hss0 # device hss1 # PCMCIA Joystick # device joy0 at isa? port "IO_GAME" pseudo-device loop pseudo-device ether pseudo-device log pseudo-device sl 1 # DHCP uses BPF (Berkeley Packet Filter) pseudo-device bpfilter 4 # ijppp uses tun instead of ppp device pseudo-device ppp 2 pseudo-device vn 1 pseudo-device tun 2 pseudo-device pty 16 pseudo-device gzip # Exec gzipped a.out's pseudo-device snp 2 # options DDB # KTRACE enables the system-call tracing facility ktrace(2). # This adds 4 KB bloat to your kernel, and slightly increases # the costs of each syscall. options KTRACE #kernel tracing # This provides support for System V shared memory. # options SYSVSHM options SYSVSEM options SYSVMSG device pcm0 at isa? port? tty irq 10 drq 1 flags 0x0 vector pcmintr