#
# THINKPAD -- IBM ThinkPad machine with WD/AHx/NCR/BTx family disks
#
# For more information on this file, please read the handbook section on
# Kernel Configuration Files:
#
#    http://www.freebsd.org/handbook/kernelconfig-config.html
#
# The handbook is also available locally in /usr/share/doc/handbook
# if you've installed the doc distribution, otherwise always see the
# FreeBSD World Wide Web server (http://www.FreeBSD.ORG/) for the
# latest information.
#
# An exhaustive list of options and more detailed explanations of the
# device lines is also present in the ./LINT configuration file. If you are
# in doubt as to the purpose or necessity of a line, check first in LINT.
#
# $FreeBSD: src/sys/i386/conf/GENERIC,v 1.143.2.24 1999/12/05 01:56:42 luoqi Exp $

machine		"i386"
#cpu		"I386_CPU"
#cpu		"I486_CPU"
#cpu		"I586_CPU"
cpu		"I686_CPU"
ident		THINKPAD
maxusers	32

#makeoptions	DEBUG=-g		#Build kernel with gdb(1) debug symbols

#options 	MATH_EMULATE		#Support for x87 emulation
options 	INET			#InterNETworking
options 	INET6			#IPv6 communications protocols
options 	FFS			#Berkeley Fast Filesystem
options 	FFS_ROOT		#FFS usable as root device [keep this!]
options 	MFS			#Memory Filesystem
options 	MD_ROOT			#MD is a potential root device
#options 	NFS			#Network Filesystem
#options 	NFS_ROOT		#NFS usable as root device, "NFS" req'ed
options 	MSDOSFS			#MSDOS Filesystem
options 	"CD9660"		#ISO 9660 Filesystem
options 	"CD9660_ROOT"		#CD-ROM usable as root. "CD9660" req'ed
options 	PROCFS			#Process filesystem
options 	"COMPAT_43"		#Compatible with BSD 4.3 [KEEP THIS!]
options 	SCSI_DELAY=15000	#Be pessimistic about Joe SCSI device
options 	UCONSOLE		#Allow users to grab the console
#options 	FAILSAFE		#Be conservative
options 	USERCONFIG		#boot -c editor
options 	VISUAL_USERCONFIG	#visual boot -c editor
options 	KTRACE			#ktrace(1) syscall trace support
options 	SYSVSHM			#SYSV-style shared memory
options 	SYSVMSG			#SYSV-style message queues
options 	SYSVSEM			#SYSV-style semaphores
#options	PNPBIOS			#To support sound
options 	P1003_1B		#Posix P1003_1B real-time extensions
options 	_KPOSIX_PRIORITY_SCHEDULING
options		ICMP_BANDLIM		#Rate limit bad replies
options		SOFTUPDATES		#Enable soft updates
#options		USER_LDT		# Use this for wine

# To make an SMP kernel, the next two are needed
#options 	SMP			# Symmetric MultiProcessor Kernel
#options 	APIC_IO			# Symmetric (APIC) I/O
# Optionally these may need tweaked, (defaults shown):
#options 	NCPU=2			# number of CPUs
#options 	NBUS=4			# number of busses
#options 	NAPIC=1			# number of IO APICs
#options 	NINTR=24		# number of INTs

device	isa
#device	eisa
device	pci

# Floppy drives
device		fdc0	at isa? port "IO_FD1" irq 6 drq 2
device		fd0	at fdc0 drive 0
#device		fd1	at fdc0 drive 1

# IDE controller and disks
#options		"CMD640"	# work around CMD640 chip deficiency
#device	wdc0	at isa? port "IO_WD1" bio irq 14
#device		wd0	at wdc0 drive 0
#device		wd1	at wdc0 drive 1
#
#device	wdc1	at isa? port "IO_WD2" bio irq 15
#device		wd2	at wdc1 drive 0
#device		wd3	at wdc1 drive 1

# ATA and  ATAPI devices
device		ata0	at isa? port IO_WD1 irq 14
#device		ata1	at isa? port IO_WD2 irq 15
device		ata
device		atadisk			# ATA disk drives
device		atapicd			# ATAPI CDROM drives
device		atapifd			# ATAPI floppy drives
#device		atapist			# ATAPI tape drives
options 	ATA_STATIC_ID		# Static device numbering
#options	ATA_ENABLE_WC		# Enable write cache
#options 	ATA_ENABLE_ATAPI_DMA	# Enable DMA on ATAPI devices
#device		acd0		#IDE CD-ROM
#device		wfd0		#IDE Floppy (e.g. LS-120)

# SCSI Controllers
# A single entry for any of these controllers (ncr, ahb, ahc) is
# sufficient for any number of installed devices.
#controller	ncr0		# NCR/Symbios Logic
#controller	ahb0		# EISA AHA1742 family
#controller	ahc0		# AHA2940 and onboard AIC7xxx devices
#controller	amd0		# AMD 53C974 (Teckram DC-390(T))
#controller	isp0		# Qlogic family
#controller	dpt0		# DPT Smartcache - See LINT for options!

#controller	adv0	at isa? port ? cam irq ?
#controller	adw0
#controller	bt0	at isa? port ? cam irq ?
#controller	aha0	at isa? port ? cam irq ?
#controller	aic0	at isa? port ? cam irq ?

# SCSI peripherals
# Only one of each of these is needed, they are dynamically allocated.
#controller	scbus0		# SCSI bus (required)
#device		da0		# Direct Access (disks)
#device		sa0		# Sequential Access (tape etc)
#device		cd0		# CD
#device		pass0		# Passthrough device (direct SCSI)

# Proprietary or custom CD-ROM Interfaces
#device		wt0	at isa? port 0x300 bio irq 5 drq 1
#device		mcd0	at isa? port 0x300 bio irq 10
#device		matcd0	at isa? port 0x230 bio
#device		scd0	at isa? port 0x230 bio

# atkbdc0 controls both the keyboard and the PS/2 mouse
device		atkbdc0	at isa? port IO_KBD
device		atkbd0	at atkbdc? irq 1
device		psm0	at atkbdc? irq 12

device		vga0	at isa?

# Audio driver
device pcm0 at isa? port 0x52c irq 5 drq 1 flags 0x10

# splash screen/screen saver
pseudo-device	splash

# syscons is the default console driver, resembling an SCO console
device		sc0	at isa?

# Enable this and PCVT_FREEBSD for pcvt vt220 compatible console driver
#device		vt0	at isa? tty
#options 	XSERVER			# support for X server
#options 	FAT_CURSOR		# start with block cursor
# If you have a ThinkPAD, uncomment this along with the rest of the PCVT lines
#options 	PCVT_SCANSET=2		# IBM keyboards are non-std

# Floating point support - do not disable.
device		npx0	at nexus? port IO_NPX irq 13

# Power management support (see LINT for more options)
device		apm0    at nexus?	# Advanced Power Management

# PCCARD (PCMCIA) support
device	card
device		pcic0	at isa? irq 10 port 0x3e0 iomem 0xd0000
# device		pcic0	at isa?
device		pcic1	at isa? irq 11 port 0x3e2 iomem 0xd4000 disable

# Serial (COM) ports
device		sio0	at isa? port "IO_COM1" irq 4
#device		sio1	at isa? port "IO_COM2" irq 3
#device		sio2	at isa? disable port "IO_COM3" irq 5
#device		sio3	at isa? disable port "IO_COM4" irq 9

# Parallel port
device		ppc0	at isa? irq 7
device		ppbus			# Parallel port bus (required)
device		lpt			# Printer
#device		plip			# TCP/IP over parallel
device		ppi			# Parallel port interface device
#device		vpo			# Requires scbus and da0

# PCI Ethernet NICs.
#device		de		# DEC/Intel DC21x4x (``Tulip'')
#device		fxp		# Intel EtherExpress PRO/100B (82557, 82558)
#device		tx		# SMC 9432TX (83c170 ``EPIC'')
#device		vx		# 3Com 3c590, 3c595 (``Vortex'')
#device		wx		# Intel Gigabit Ethernet Card (``Wiseman'')

# PCI Ethernet NICs that use the common MII bus controller code.
#device		miibus		# MII bus support
#device		dc		# DEC/Intel 21143 and various workalikes
#device		rl		# RealTek 8129/8139
#device		sf		# Adaptec AIC-6915 (``Starfire'')
#device		sis		# Silicon Integrated Systems SiS 900/SiS 7016
#device		ste		# Sundance ST201 (D-Link DFE-550TX)
#device		tl		# Texas Instruments ThunderLAN
#device		vr		# VIA Rhine, Rhine II
#device		wb		# Winbond W89C840F
#device		xl		# 3Com 3c90x (``Boomerang'', ``Cyclone'')


# ISA Ethernet NICs.
#device		ed0	at isa? port 0x280 irq 10 iomem 0xd8000
#device		ep
#device		ex
#device		fe0	at isa? port 0x300 net irq ?
#device		le0	at isa? port 0x300 net irq 5 iomem 0xd0000
#device		lnc0	at isa? port 0x280 net irq 10 drq 0
#device		cs0	at isa? port 0x300 net irq ?
# requires PCCARD (PCMCIA) support to be activated
device		xe
# WaveLAN/IEEE 802.11 wireless NICs. Note: the WaveLAN/IEEE really
# exists only as a PCMCIA device, so there is no ISA attatement needed
# and resources will always be dynamically assigned by the pccard code.
device		wi
# Aironet 4500/4800 802.11 wireless NICs. Note: the declaration below will
# work for PCMCIA and PCI cards, as well as ISA cards set to ISA PnP
# mode (the factory default). If you set the switches on your ISA
# card for a manually chosen I/O address and IRQ, you must specify
# those paremeters here.
device		an
# The probe order of these is presently determined by i386/isa/isa_compat.c.
#device		ie0	at isa? port 0x300 irq 10 iomem 0xd0000
#device		fe0	at isa? port 0x300
#device		le0	at isa? port 0x300 irq 5 iomem 0xd0000
#device		lnc0	at isa? port 0x280 irq 10 drq 0
#device		cs0	at isa? port 0x300
#device		sn0	at isa? port 0x300 irq 10

# Pseudo devices - the number indicates how many units to allocated.
pseudo-device	loop		# Network loopback
pseudo-device	ether		# Ethernet support
#pseudo-device	sl	1	# Kernel SLIP
#pseudo-device	ppp	1	# Kernel PPP
pseudo-device	tun		# Packet tunnel
pseudo-device	pty		# Pseudo-ttys (telnet etc)
pseudo-device	md		# Memory "disks"
pseudo-device	gif	4	# IPv6 and IPv4 tunneling
pseudo-device	faith	1	# IPv6-to-IPv4 relaying (translation)

# The `bpf' pseudo-device enables the Berkeley Packet Filter.
# Be aware of the administrative consequences of enabling this!
pseudo-device	bpf		#Berkeley packet filter

# USB support
#device		uhci		# UHCI PCI->USB interface
#device		ohci		# OHCI PCI->USB interface
#device		usb		# USB Bus (required)
#device		ugen		# Generic
#device		uhid		# "Human Interface Devices"
#device		ukbd		# Keyboard
#device		ulpt		# Printer
#device		umass		# Disks/Mass storage - Requires scbus and da
#device		ums		# Mouse
# USB Ethernet, requires mii
#device		aue		# ADMtek USB ethernet
#device		cue		# CATC USB ethernet
#device		kue		# Kawasaki LSI USB ethernet